Tank Senders

A tank sender uses a precision pressure transducer to measure the pressure of air trapped in a sender body. As the fluid level increases the pressure rises. The unit outputs 0 volts when empty and 10 volts (nominal) when full.  The sender can generate an output voltage higher than 10V (100%). The sender can be trimmed to display 100% via a trim pot inside the sender head. This needs to be done with the tank full.

They operate from a nominal 24V DC power supply protected by a 3Amp fuse or circuit breaker. More than one meter can be driven from a single sender. Sender can feed standard instrument, PLC or VE.Net module for network applications.

Please note that our tank senders are built to order and will take a minimum of 10 working days from receipt of your order. When we receive your order will then forward you a sheet on which we will ask you to complete some specific measurements so that your tank sender is right for your project. Please ensure you give us a suitable contact email and telephone numbers for this purpose.

Tank Sender for Black Water£96.00			Tank Sender for Fresh, Grey or Black Water. Tank Depth 600mm£96.00			Tank Sender for Fresh, Grey or Black Water. Tank Depth 750mm£96.00
Tank Sender for Fresh, Grey or Black Water. Tank Depth 800mm£96.00			Tank Sender for installation in outlet pipework, Fresh or Grey Water£92.00			Tank Sender Fresh Water, Grey or Black Water£96.00
Tank Sender Fuel£101.00			Tank Sender Fuel. Right Angle, side entry to tank£101.00			Tank Sender Pipe
Tank Sender suitable Fresh or Grey Water Tank Depth 347mm£96.00